TECHNICAL QUESTIONS BEFORE BUYING A MATTRESS

Recommended measures of the mattress.
For the length of the mattress, 15 cm are recommended more than the person higher than sleeps in the same. The recommendable minimum width for an individual mattress is of 90 or 105 cm, and 150 cm for the mattresses where two people sleep.

Advice on covers for the protection of its mattress 
Each weave has a different composition and properties. We recommended to him that it reads the card of the product for more complete information. We recommended to him that it uses covers that allow to transpirar like those of cotton 100%. If it is possible to be chosen, those covers are more recommendable than they outdoors leave the part low of the mattress.

What has supported to choose?
In the first place it is necessary to clarify that based on the mattress, we will be able to decide on one or the other type of support for the mattress. 
For the mattresses of wharves and viscoelásticos, any type of support will be valid, recommending itself in the case of the mattresses of wharves an upholstered base and in the one of the viscoelásticos mattresses of somier of multilaminae. For the latex mattresses, type multilaminae will be solely valid somieres

What type of pillow to choose?
It is very important to know that not to rest the necessary time, nor of the correct form, it can aggravate to our organism causing losses of flexibility of our muscles and securing an exaggerated deterioration of the spine. It is for that reason, that the election of a good pillow is a very important factor. Also, before sending itself to the purchase of his pillow, he is advisable that reads the advice who we give him:

If you sleep of side we recommended a heavy pillow to you. It must maintain the neck in the axis of the dorsal column, assuring that it does not fall nor it rotates.

If you sleep above knocked down mouth we recommended a relatively fine pillow to you. This one must assure that the cervical zone forms the same angle that when being standing up with the dorsal column. A too heavy pillow would cause that the neck was flexionase exaggeratedly forwards, whereas to sleep without pillow we would obtain that the neck was too prim and rigid. Remaining during hours in these two positions we would secure the appearance of cervical contracturas.

If you are of that you sleep mouth down, you must know that he is not nothing recommendable. When doing usually one modifies it the curvature of the lumbar column. In addition to be able to breathe, you must maintain the neck turned during several hours. If by some reason you cannot sleep in another position, you would have to try to slightly do it of flank. Maintaining a leg doubled and the other rigid one, flexionando the hip and shoulders it made the flank of the doubled leg, thus we would obtain that the position of the neck with respect to the column, is but similar the possible thing to when we are standing up.

Hardness of the Pillows
A specific landlord does not exist to define which is the ideal hardness of a pillow, will depend on our weight and the position in which we sleep.
At the time of choosing the hardness of a pillow we will have to consider the personal tastes of each person, being tried who is a quality pillow that allows a correct position us of the cervical ones.
In all our pillows it will be able to see an approach of the hardness degree and comfort, for one better direction in the purchase.

Ideal height of the Pillows
Like in the previous case a landlord does not exist that defines the ideal height of the pillows. Yes that we must try, that the pillows have a smaller height for the small ones of the house.
Also we must consider the personal tastes of each person, trying who is a quality pillow that allows a correct position us of the spine.

In double beds, is better a great pillow or two individual ones? 
Without doubt, two individual pillows will allow us to rest of more comfortable and suitable form. Besides this form less to our companion will be bothered.
At the time of making the bed, the aesthetic one of two pillows we can not like, for this reason, always we will be able to acquire a great pillow of economic range, to use it at the time of making the bed.

Why is recommended a mattress by person?
This recommendation has to do with reasons of technical and practical type. If a significant difference of weight in the pair exists, is then important that each has the mattress adapted to its weight. On the other hand, the ribbon base responds to the movements of the sleeper, being so then when moving one of both it will tend to move to his pair, eliminating itself the problem with the use of two mattresses. Additionally, he is more comfortable to conserve independence in the movement of the head, back or feet, since with a mattress they would have to be always both in the same position, to the same time.
Finally, with the use of a bed frame that disables the side slip of the mattresses, he is imperceptible the division between the mattresses.

Is uncomfortable the use of two mattresses in a double bed (Queen/King)?
Quite the opposite. As it is mentioned in the previous question, the bed frame that disables the side slip of the mattresses makes the division between the mattresses imperceptible. When using 2 mattresses can be taken advantage of all the advantages mentioned in the previous question.

It is necessary to use individual savannahs for the double beds?
This will depend on the positions of the bed. In the models in which the head only rises, even though that is used 2 mattresses, it can use a single savannah to cover both mattresses. In the models in which the head reclines, the back and the feet (manual or electrically) he is recommendable to use 2 savannahs, for greater comfort. The equal bed uses a single eiderdown tender it.

Which is the time of life of products? 
The guarantee that is granted in the case of the mattresses and the bases is of 10 years. For the case of the bases an appropriate and careful use of the product can prolong the life utility of the base by many years more. In the case of the Star-flex and Mobi-flex, its durability can be until of 20-30 years. The same can happen to the Moon-flex. For the mattresses, even though that the appropriate maintenance (to turn around the mattress per week once) will prolong its life utility up to 12-14 years, he is recommendable after this time, of all ways to change his mattress. This is thus since after 10 years a mattress is saturated of toxins that the body through sweat eliminates, during the night. For this same reason he is totally unhygienic to inherit the mattress of the parents to the children.

Why it serves the protector who is placed underneath the mattress?
This protector protects the mattress of the constant friction that exists between ribbons and the mattress. The material is special so that it does not obstruct the air flow that must exist towards the mattress and of the mattress to the outside.

How I can protect the mattresses? 
The mattresses can protect of spilling of liquids, spots caused by the sweat of the sleeper and/or urine of a boy or animal, covering the mattress with molton. This molton is done of a material that absorbs the liquid during the night and it does not allow that this one happens to the mattress. Obvious, it is precise first thing in the morning to remove molton, to wash it and to place it again on the mattress. The material del that is done is 100% cotton.

Produces allergy the natural materials in the mattresses?
The natural materials of which the mattresses are done are treated chemically so that they do not bring about allergies to the sleeper. Also these materials entail a sophisticated treatment that makes apt for the domestic use. Despite if a person suffers of very strong allergies to the natural materials (statistically they are less than 5% of the people), Swiss Comfort has mattresses done of synthetic materials.

A mattress must be hard to be orthopaedic?
Orthopaedic Larousse means “regarding orthopaedics” (, dictionary of the Spanish language) and Orthopaedics means “part of the medicine that takes care of the treatment of the affections of the skeleton, joints, locomotive apparatus, etc.” (Larousse, dictionary of the Spanish language). 
The term badly has been used mainly for referring products with sleeping, in the sense that has been used “orthopaedic” like synonymous of “duro” (medieval tradition where according to the historical registries, tables underneath the mattresses were placed).

An orthopaedic mattress, if the term is used correctly, would be that one that allows its skeleton (spine, etc), joints, muscles, etc. to rest in perfect form, on the mattress, without there are pressure points that attempt against the natural state of the body and bring about then pain or muscular contracturas.

In this sense All the mattresses are orthopaedic. The mattresses are different according to the different corporal weights, is not the same a mattress for a low influential person, that stops a high influential person. The important thing so that the mattress well it has left to its body, is that he is not nor too smooth (swaggers when lying down) nor too hard (a hollow under the lordosis when lying down becomes).

In fact the beds (integrated system base and mattress) are customized beds that adapt in perfect form to THEIR BODY and exists a different alternative for each weight and particular condition.

Why mattresses have holes by a face and others by the two? 
It is consequence of the manufacture process, those perforations are produced by small bars with double function: application of heat and creation of ergonomic zones. We have analyzed each and verified that their properties are exactly equal to provide the best rest. In any case, this one difference in the perforations from a nucleus to another one does not happen with this new mattress.

In a very humid zone, Runs the danger the mattress to apulgarar itself? It needs more cares than in a dry zone? 
The latex mattress can be used in any zone, considering that to greater humidity degree, more taken care of it requires: I turn around and aerated they must be more frequent

Recommendation when perspiration problems are had
If perspiration problems are had it is essential that the mattress is wadding with layers of cotton and fiber. Since these elements isolate the possible heat that could cause the nucleus.

It is possible to use both faces of the viscolásticos mattresses? 
In the case of Memory Latex, it is perfectly possible to use the latex face to sleep, although he will be more comfortable in the viscolástica part, when perceiving the comfort of the viscolástico plus the one of the latex.

Effect Heat of the viscoelástico?
The viscoelástico material is a material that adapts perfectly to our body, surrounding completely the supported zone.
When being a greater zone of the mattress in contact with our body, causes that it increases the heat of the zones that are in contact with the enemy. 
The viscoelásticos mattresses of Absolutebeds have waddings of cotton and fiber so that one complete sweating in these zones exists and to avoid to a great extent, the effect heat that cause these mattresses.

Weightlessness and Vertigo of the viscoelástico 
The viscoelástico material diminishes the pressure sensation on the surface that is in contact with the enemy with him. When easing up on a viscoelástico mattress many people have the sensation to be “floating” in the air. For that reason he is inadvisable for the people who undergo vertigo.

Densidad of the mattresses?
The densidad of the latex mattresses is different according to models and marks. The most popular densidad is the one of 75 kilos/m3, although there are companies that offer densidades superiors of up to 85 kilos/m3 being, in our opinion, excessively signs. There are also manufacturers who use in their mattresses densidades of 60 or 65 kilos, being of an excessively fluffy tact. In addition, the main manufacturers of latex buying recommend intermediate densidades, because those that are superiors, that is to say of more than 80 kilos/m3, tend to become stiff to the few years

If he wishes a mattress signs or harder, we advised to him that he chooses by a viscoelástico mattress or of wharves.

They give to heat the Latex mattresses? 
First of all, the latex is a very elastic material in which the person who rests envelope he sinks more than in a mattress of wharves. This collapse produces that the zone of corporal contact is much greater and therefore, is a heat sensation. In any case, a cover of quality and a correct disposition of the conduits of ventilation of the nucleus cause that the sensation is minimum and falls asleep of correct form.

It remembers that the synthetic latex will allow one worse sweating of the person who rests envelope he and the heat sensation will be major that the one of natural latex 100%.

Height of a Latex mattress
The minimum altitude of a latex mattress is of 15 cm of nucleus (18 totals), although the most sold are of 18 or 19 of nucleus (21 or 23 totals, respectively). To more height, the duration of the product will be greater and the comfort degree also

Humidities and sweating of the latex mattresses 
The latex mattresses require a sweating superior to the one of the rest of mattresses. On the contrary, they can appear spots of humidity in the mattress. By this same one, the latex mattresses cannot be used on upholstered bases or aperitives with cover. In addition, he is recommendable to air the mattress regularly (1 time to the week at least, when doing the bed).
This type of mattresses does not have any problem in being used in zones of coast where the atmosphere usually is more humid. On the contrary, he is not recommendable to locate them in old houses in which there is a very high humidity degree.

Why there is as much difference of price between the natural Latex the 100% and Latex with synthetic composition?
Even being all mattresses of 100% latex, we will be with qualities very different from finished composition and from cover. Many manufacturers confirm that the mattresses that sell are 100% latex, but very few give of certified form a percentage of 100% natural latex. Latex 100% can be elaborated of different forms:

On the one hand, we would have the natural elaboration, in which they are used exclusively material natural. (It draws resin from of the tree of the Rubber).

On the other hand, we would have the artificial elaboration in which synthetic components are used. (Petroleum, etc).

By norm, the more percentage it takes of natural latex a mattress, better will be his quality, its comfort, its comfort, etc. Of this form, the recommended mattresses the more are those of 100% natural latex and less the most recommended those of 100% synthetic latex. It is important to inform to us about this point at the time of realising our purchase, because there are many deceits and frauds in this aspect.

For more information on this product, to see: latex mattresses